This vignette illustrates the relationship between simple linear regression via least squares, in the familiar **data space** of \((x, y)\) and an equivalent representation by means of linear equations for the observations in the less familiar \(\beta\) space of the model parameters in the model \(y_i = \beta_0 + \beta_1 x_i + e_i\).

In data space, we probably all know that the least squares solution can be visualized as a line with intercept \(b_0 \equiv \widehat{\beta_0}\) and slope \(b_1 \equiv \widehat{\beta_1}\). But in \(\beta = (\beta_0, \beta_1)\) space, the same solution is the point, \((b_0, b_1)\).

There is such a pleasing duality here:

- A line in data space corresponds to a point in beta space
- A point in data space corresponds to a line in beta space

But wait, there’s one more space: **observation space**, the *n*-dimensional space for *n* observations. These ideas have a modern history that goes back to Dempster (1969). It was developed in the context of linear models by Fox (1984) and Monette (1990). Some of these geometric relations are explored in a wider context in Friendly et al. (2013).

We start with a simple linear regression problem, shown in **data space**.

Fit the linear model, `y ~ x`

. The intercept is `b0 = 2.5`

and the slope is `b1 = -1`

.

```
(mod <- lm(y ~ x))
##
## Call:
## lm(formula = y ~ x)
##
## Coefficients:
## (Intercept) x
## 2.5 -1.0
```

Plot the data and the least squares line.

This problem can be represented by the matrix equation, \(\mathbf{y} = [\mathbf{1}, \mathbf{x}] \mathbf{b} + \mathbf{e} = \mathbf{X} \mathbf{b} + \mathbf{e}\).

```
X <- cbind(1, x)
printMatEqn(y, "=", X, "*", vec(c("b0", "b1")), "+", vec(paste0("e", 1:4)))
## y X
## 1 = 1 1 * b0 + e1
## 2 1 1 b1 e2
## 3 1 -1 e3
## 4 1 -1 e4
```

Each equation is of the form \(y_i = b_0 + b_1 x_i + e_i\). The least squares solution minimizes \(\sum e_i^2\).

We can also describe this a representing four equations in two unknowns, `c("b0", "b1")`

.

```
showEqn(X, y, vars=c("b0", "b1"), simplify=TRUE)
## b0 + b1 = 1
## b0 + b1 = 2
## b0 - 1*b1 = 3
## b0 - 1*b1 = 4
```

Each equation corresponds to a line in \((b_0, b_1)\) space. Let’s plot them. `plotEqn`

draws a point at the intersection of each pair of lines — a solution for that pair of observations.

```
plotEqn(X, y, vars=c("b0", "b1"), xlim=c(-2, 4))
## b0 + b1 = 1
## b0 + b1 = 2
## b0 - 1*b1 = 3
## b0 - 1*b1 = 4
```

In this space, not all observation equations can be satisfied simultaneously, but a best approximate solution can be represented in this space by the coefficients of the linear model \(y = X \beta\), where the intercept is already included as the first column in \(X\).

```
plotEqn(X, y, vars=c("b0", "b1"), xlim=c(-2, 4))
## b0 + b1 = 1
## b0 + b1 = 2
## b0 - 1*b1 = 3
## b0 - 1*b1 = 4
solution <- lm( y ~ 0 + X)
loc <- coef(solution)
points(x=loc[1], y=loc[2], pch=16, cex=1.5)
```

The LS solution is shown by the black point, corresponding to \((b_0, b_1) = (2.5, -1)\).

There is also a third vector space, one where the coordinate axes refer to the observations, \(i:n\), with data \((y_i, x_{i0}, x_{i1}, ...)\). The \(n\)-length vectors in this space relate to the variables **y** and predictors **x1**, **x2** … . Here, **x0** is the unit vector, `J(n)`

, corresponding to the intercept in a model. For \(n\) observations, this space has \(n\) dimensions.

In the case of simple linear regression, the fitted values, \(\widehat{\mathbf{y}}\) correspond to the projection of \(\mathbf{y}\) on the plane spanned by \(\mathbf{x_0}, \mathbf{x_1}\), or `yhat <- Proj(y, c(bind(x0, x1)))`

.

In this space, the vector of residuals, \(\mathbf{e}\) is the orthogonal complement of \(\widehat{\mathbf{y}}\), i.e., \(\widehat{\mathbf{y}} \perp \mathbf{e}\). Another geometrical description is that the residual vector is the normal vector to the plane.

This space corresponds to the matrix algebra representation of linear regression,

\[ \mathbf{y} = \mathbf{X} \widehat{\mathbf{b}} + \mathbf{e} = \widehat{\mathbf{y}} + \mathbf{e} \] In fact, the least squares solution can be derived purely from the requirement that the vector \(\widehat{\mathbf{y}}\) is orthogonal to the vector of residuals, \(\mathbf{e}\), i.e., \(\widehat{\mathbf{y}}' \mathbf{e} = 0\). (The margins of this vignette are too small to give the proof of this assertion.)

Observation space can be illustrated in the vector diagram developed below, but only in \(n=3\) dimensional space, for an actual data problem. Here, we create `x0`

, `x1`

and `y`

for a simple example.

```
O <- c(0, 0, 0) # origin
x0 <- J(3) # intercept
x1 <- c(0, 1, -1) # x
y <- c(1, 1, 4) # y
y <- 2 * y / floor(len(y)) # make length more convenient for 3D plot
```

This implies the following linear equations, ignoring residuals.

```
X <- cbind(x0, x1) # make a matrix
showEqn(X, y, vars=colnames(X), simplify=TRUE)
## x0 = 0.5
## x0 + x1 = 0.5
## x0 - 1*x1 = 2
```

To display this in observation space,

- First create a basic 3D plot showing the coordinate axes.
- Then, use
`vectors3d()`

to draw the vectors`x0`

,`x1`

and`y`

. - The plane spanned by
`x0`

, and`x1`

can be specified as as the normal vector orthogonal to both, using the new`matlib::xprod()`

function. - Finally, we use
`Proj()`

to find the projection of`y`

on this plane.

```
win <- rgl::open3d()
# (1) draw observation axes
E <- diag(3)
rownames(E) <- c("1", "2", "3")
vectors3d(E, lwd=2, color="blue")
# (2) draw variable vectors
vectors3d(t(X), lwd=2, headlength=0.07)
vectors3d(y, labels=c("", "y"), color="red", lwd=3, headlength=0.07)
# (3) draw the plane spanned by x0, x1
normal <- xprod(x0, x1)
rgl::planes3d(normal, col="turquoise", alpha=0.2)
# (4) draw projection of y on X
py <- Proj(y, X)
rgl::segments3d(rbind( y, py)) # draw y to plane
rgl::segments3d(rbind( O, py)) # origin to py in the plane
corner( O, py, y, d=0.15) # show it's a right angle
arc(y, O, py, d=0.2, color="red")
```

You must enable Javascript to view this page properly.

This plot is interactive in the HTML version. Use the mouse wheel to expand/contract the plot. Drag it to rotate to a different view.

You can also spin the plot around it’s any axis or create a movie, but that isn’t done in this vignette.

For comparison, we can also show the least squares solution in data or \(\beta\) space. Here it is in linear equation (\(\beta\)) space.

Dempster, A. P. (1969). *Elements of Continuous Multivariate Analysis*, Addison-Wesley,

Fox, J. (1984). *Linear Statistical Models and Related Methods*. NY: John Wiley and Sons.

Friendly, M.; Monette, G. & Fox, J. (2013). *Elliptical Insights: Understanding Statistical Methods Through Elliptical Geometry* Statistical Science, **28**, 1-39.

Monette, G. (1990). “Geometry of Multiple Regression and Interactive 3-D Graphics” In: Fox, J. & Long, S. (Eds.) *Modern Methods of Data Analysis*, SAGE Publications, 209-256