Blind Source Separation (BSS) is a well known multivariate data analysis tool. In BSS it is assumed that the observations are formed by a linear mixture of latent variables that are unobserved but show a clearer structure. The aim of BSS is to estimate those unobserved variables which in turn can be used for further analysis. This manual aims to firstly recap BSS for spatial data and then secondly introduce the R package `SpatialBSS`

where Spatial Blind Source Separation is implemented.

In the Spatial Blind Source Separation (SBSS) model it is assumed that a \(p\)-variate random field \(X(s) = \{ X_1(s),\dots,X_p(s) \}\) is a linear mixture of an unobserved random field \(Z(s) = \{ Z_1(s),\dots,Z_p(s) \}\). Here \(s\) denotes spatial locations in a domain \(s \in S \subseteq \mathbb{R}^d\), where \(d\) is the dimension of the domain. Usually \(d\) equals two, which would for example correspond to x and y coordinates or longitude and latitude values. The following presented method is mainly designed to be used with irregular spatial data. Formally, the SBSS model is given by

\[ X(s) = \Omega Z(s) + \mu, \] where \(\Omega\) is the so called mixing matrix and \(\mu\) is some constant shift. The latent field \(Z(s)\) shows a clearer structure than the original field \(X(s)\). In particular, \(Z(s)\) is assumed to have zero mean and unit covariance and the components of \(Z(s)\) show no spatial cross-dependence. Meaning that \(\text{E}\{ Z(s) \} = 0\), \(\text{Cov} \{ Z(s) \} = \text{E} \{ Z(s) Z(s)^\top \} = I_p\) for all \(s \in \mathcal{S}\) and \(\text{Cov} \{ Z(s_1), Z(s_2) \} = \text{E} \{ Z(s_1) Z(s_2)^\top \} = D(\lVert s_1 - s_2 \rVert)\) for all \(s_1, s_2 \in \mathcal{S}\) where \(D\) is some diagonal matrix. Hence, \(Z(s)\) is also a weakly-stationary random field.

Recovering the source random field \(Z(s)\) is particularly beneficial in spatial prediction tasks such as various kriging methods. As the latent field shows no cross-dependence, univariate kriging can be applied on each component of \(Z(s)\) individually. This approach avoids the complex modeling of cross-covariances and the use of CoKriging.

Moreover, an estimate of the unmixing matrix \(W = \Omega ^ {-1}\) can be used for interpretation similar to PCA. The loadings are given by \(W\) but in contrast to PCA the present method explicitly uses the spatial dependence of the data.

In order to recover an estimate of the unmixing matrix \(W = \Omega ^ {-1}\) local covariance matrices are used.

The aim of local covariance matrices is to quantify spatial dependence. Local covariance matrices are defined as

\[ LCov(f) = \frac{1}{n} \sum_{i=1}^n \sum_{j=1}^n f(s_i - s_j) X(s_i) X(s_j)^\top , \] and local difference matrices write as

\[ LDiff(f) = \frac{1}{n} \sum_{i=1}^n \sum_{j=1}^n f(s_i - s_j) (X(s_i) - X(s_j)) (X(s_i) - X(s_j))^\top. \]

Here, the sums range over all points in the domain and the locality is defined by the kernel function \(f\). For each location \(s_i\) in the considered domain spatial dependence to each point \(s_j\) is computed by the inner sum. The kernel function \(f(s_i - s_j)\) determines which points \(s_j\) are considered based on the distance between them. Whereas, the outer sum averages the inner sums of all points \(s_i\) which leads to an average local spatial dependence measure for the random field \(X(s)\). The difference between \(LCov(f)\) and \(LDiff(f)\) matrices lies in the fact that \(LDiff(f)\) matrices are more robust when the random field shows a smooth trend compared to \(LCov(f)\) matrices. Note that if \(f(x) = f_0(x) = I( x = 0)\) where \(I(x)\) is the indicator function, then \(LCov(f_0)\) reduces to an ordinary covariance estimator. Three options for the kernel function are suggested:

Ball: \(f(d;r) = I(d \le h)\)

Ring: \(f(d;r_{in}, r_{out}) = I(r_{in} < d \le r_{out})\)

Gauss: \(f(d;r) = \exp(-0.5 (\Phi^{-1}(0.95) d/r)^2)\)

where \(d=\lVert s_1 - s_2 \rVert\), \(\Phi^{-1}(0.95)\) is the 95\% quantile of the standard normal distribution and \(r\) are the parameters for the kernel functions. The ball kernel function considers all coordinates inside a radius \(r\) around points \(s_i\), the Gauss kernel can be considered as a smooth version of the ball kernel. And as the name implies, ring kernels consider points \(s_j\) that are between \(r_{in}\) and \(r_{out}\) separated from \(s_i\).

One key result that is used in almost every BSS method states that when the data is standardized by \(X^{st}(s) = \Sigma^{-½} ( X(s) - \text{E}(X(s)))\) then \(X^{st}(s) = U Z(s)\), where \(U\) is an orthogonal matrix and \(\Sigma^{-½}\) is the inverse square root of the covariance matrix. This result can be used to reduce the task of finding a general unmixing matrix to a two step approach of first standardizing the data and then only finding an orthogonal matrix \(U\). In the following, \(M(f)\) denote either \(LCov(f)\) or \(LDiff(f)\) matrices. These considerations lead to the following algorithm for SBSS:

Standardizing the random field \(X(s)\) by \(X^{st}(s) = LCov(f_0)^{-½} ( X(s) - \overline{X})\), where \(\overline{X} = \frac{1}{n} \sum_{i = 1}^n X(s_i)\).

For a certain choice of kernel functions \(f_1,\dots,f_k\) the corresponding local scatter matrices \(M(f_1),\dots,M(f_k)\) are computed with the whitened data \(X^{st}(s)\) from the first step. Then an orthogonal matrix \(U\) is computed by:

```
* For the case of $k=1$: The eigen-decomposition of $M(f_1) = U \Lambda U^\top$ is computed to find $U$.
* For the case of $k > 1$: The local scatter matrices $M(f_1),\dots,M(f_k)$ are approximately jointly diagonalized by maximizing their diagonal elements. Formally, this is done by maximizing
```

\[ \sum_{l=1}^k \left \| \text{diag} \left( {{U}^\top M(f_l) { U }} \right) \right \|_F^2 . \] Hence, this approach finds an orthogonal matrix \(U\) that makes all considered local covariance matrices as diagonal as possible.

The estimated unmixing matrix is given by \(\hat{W} = U^\top LCov(f_0)^{-½}\). In summary, this approach leads to a latent field \(Z(s)\) that shows minimal spatial cross-dependence. The package `SpatialBSS`

implements the above discussed approaches and is presented below.

`sbss`

The `SpatialBSS`

packages main function is `sbss`

. It implements the above discussed approach to compute an estimate of the latent field \(Z(s)\) as well as the unmixing matrix \(W\). To show the functionality of this function 1000 coordinates are simulated as follows.

```
coords <- runif(1000 * 2) * 10
dim(coords) <- c(1000, 2)
```

In the next step three univariate random fields are simulated and mixed with a matrix in order to simulate data that follows the above defined SBSS model.

```
if (requireNamespace("RandomFields", quietly = TRUE)) {
mix_mat <- matrix(rnorm(9), 3, 3)
RandomFields::RFoptions(spConform = FALSE)
field_1 <- RandomFields::RFsimulate(model = RandomFields::RMexp(scale = 0.5),
x = coords)
field_2 <- RandomFields::RFsimulate(model = RandomFields::RMexp(scale = 1),
x = coords)
field_3 <- RandomFields::RFsimulate(model = RandomFields::RMspheric(scale = 2),
x = coords)
field <- tcrossprod(cbind(field_1, field_2, field_3), mix_mat)
} else {
stop('The package RandomFields is needed to run this example.')
}
```

`field`

is now the data matrix of the random field \(X(s)\) of dimension `c(n,p)`

where \(n=1000\) and \(p=3\). To estimate the unmixing matrix spatial kernel functions and their corresponding parameters have to be chosen. As the maximum extension of the domain is \(10\) it makes sense to use for example non-overlapping rings that do not extend further as the domain. Hence, for the function `sbss`

a vector of consecutively inner and outer radii has to be defined for ring kernels (for Gauss and ball kernels a vector of parameters suffices as these kernels only have one parameter):

```
kernel_type <- 'ring'
kernel_parameters <- c(0, 1.5, 1.5, 3, 3, 4.5, 4.5, 6)
```

After defining the used kernels and providing the coordinates of the field as well as the values `sbss`

can be used:

```
library('SpatialBSS')
sbss_res <- sbss(x = field, coords = coords,
kernel_type = kernel_type,
kernel_parameters = kernel_parameters)
```

The output of `sbss`

is a list of class `'sbss'`

that contains the quantities which were used at computation. Important entries might be:

`s`

: is a matrix of dimension`c(n,p)`

containing the estimated latent random field \(Z(s)\).`w`

: the estimated unmixing matrix.`d`

: is a matrix of dimension`c(k*p,p)`

. Which are the stacked jointly diagonalized local covariance matrices.

`sbss`

uses an algorithm that is based on Givens rotation to jointly diagonalize the local covariance matrices, it is implemented by the function `frjd`

from the package `JADE`

. With the `...`

argument of `sbss`

further arguments can be given to `frjd`

.

To examine the estimated latent random field, the `plot`

function can be used. Internally, it casts the latent field to an object of class `'SpatialPointsDataFrame'`

and uses `spplot`

from the package `sp`

. `...`

can be used to provide further arguments to `spplot`

:

```
plot(sbss_res, colorkey = TRUE, as.table = TRUE, cex = 1)
```

`SpatialBSS`

also provides a predict function which uses Inverse Distance Weighting (IDW) to interpolate the estimated latent field on a grid. The power parameter for IDW can be set with the argument `p`

(default is 2). `n_grid`

determines the side lengths of the rectangular shaped grid by the differences of the rounded maximum and minimum values divided by the `n_grid`

argument for each column of the `coords`

argument that was used for the `sbss`

call. Similar as in the plot function, these predictions are plotted with `spplot`

and `...`

can be used to provide further arguments for plotting.

```
predict(sbss_res, p = 2, n_grid = 50, colorkey = TRUE, as.table = TRUE, cex = 1)
```

Spatial data can be handled in R with numerous packages, it seems that the package `sp`

as well as `sf`

are commonly used. `sbss`

can also be used in conjunction with the class `'SpatialPointsDataFrame'`

from `sp`

and the class `'sf'`

from `sf`

. For example the same data and kernel setting as above with the package `sp`

.

```
field_sp <- sp::SpatialPointsDataFrame(coords = coords, data = data.frame(field))
res_sbss_sp <- sbss(x = field_sp, kernel_type = kernel_type,
kernel_parameters = kernel_parameters)
```

And the same setting from above used with the package `sf`

. Note that `sf`

provides a `plot`

function which is used in the `plot`

and `predict`

methods for `'sbss'`

objects.

```
if (requireNamespace('sf', quietly = TRUE)) {
field_sf <- sf::st_as_sf(data.frame(coords = coords, field),
coords = c(1,2))
res_sbss_sf <- sbss(x = field_sf, kernel_type = kernel_type,
kernel_parameters = kernel_parameters)
} else {
stop('Please install the package sf to run the example code.')
}
```

For the two examples above `coords`

is not needed as the spatial objects carry the coordinates of field already. Furthermore, the entry `s`

of an object of class `'sbss'`

is now of the same class as the argument `x`

of the `sbss`

call.

For all the above calls of `sbss`

\(LCov(f)\) matrices were used. The argument `lcov`

of `sbss`

defines which type of local scatter matrix is used, the default is `'lcov'`

which leads to the use of \(LCov(f)\) matrices and `'ldiff'`

leads to the use of \(LDiff(f)\) matrices. In the following, the same `sbss`

call is made but with the use of \(LDiff(f)\) matrices.

```
sbss_res_lcov <- sbss(x = field, coords = coords,
kernel_type = kernel_type, lcov = 'ldiff',
kernel_parameters = kernel_parameters)
```

Internally, `sbss`

computes for each chosen kernel function a matrix of dimension `c(n,n)`

where each entry corresponds to the kernel function evaluated at the distance between two points. Hence, the entry i,j corresponds to \(f(s_i - s_j)\) in the definition of local covariance matrices above. `spatial_kernel_matrices`

is called inside `sbss`

and therefore needs `coords`

, `kernel_type`

and `kernel_parameters`

as described above. For the former example:

```
ring_kernel_matrices <- spatial_kernel_matrix(coords, kernel_type, kernel_parameters)
```

`ring_kernel_matrices`

is a list with the four corresponding ring kernel matrices, which can also be given to `sbss`

via the `kernel_list`

argument. This procedure avoids unnecessary computation of kernel matrices when `sbss`

is called numerous times with the same coordinates and kernel function setting. For the above example:

```
sbss_k <- sbss(x = field, kernel_list = ring_kernel_matrices)
```

Note that the `coords`

argument is not needed as the spatial kernel matrices are already computed.

With the function `local_covariance_matrix`

local covariance matrices can be computed based on spatial kernel matrices. This function gets the values of the random field and kernel matrices (usually the output of `spatial_kernel_matrix`

) as input arguments. Furthermore, with the argument `whitening`

it can be set if the random field is standardized prior computing local covariance matrices. For the former example:

```
local_cov <- local_covariance_matrix(field, kernel_list = ring_kernel_matrices,
whitening = TRUE)
```

The output of this function is a list of same length as `kernel_list`

, where each entry is a local covariance matrix for the corresponding spatial kernel matrix. Again `local_covariance_matrix`

has the argument `lcov`

that determines which version of the local scatter matrices is computed. The default is `'lcov'`

which leads to the use of \(LCov(f)\) matrices and `'ldiff'`

leads to the use of \(LDiff(f)\) matrices. In the following is the same call of `local_covariance_matrix`

but \(LDiff(f)\) matrices are computed

```
local_diff <- local_covariance_matrix(field, kernel_list = ring_kernel_matrices,
lcov = 'ldiff', whitening = TRUE)
```