camtrapR provides functions for organising and managing camera trap images and for the preparation of occupancy and (spatial) capture-recapture analyses. The package handles JPG images and since camtrapR 2.0.0, provides limited support for video files.
The four vignettes demonstrate the camtrapR workflow using the sample data set that is included in the package. Sample data were generated in a camera trapping survey in Sabah, Malaysian Borneo (A. Mohamed et al. J. Mammal., 94, 82-89; 2013).
You can install the newest stable version from CRAN via:
Alternatively, you can install the development version from GitHub (requires package devtools):
Afterwards, load camtrapR via:
The workflow in camptrapR is made up of a number of function that build upon one another in a logical sequence. Here is a list of function grouped by work steps in the order in which they should be run. Details on all functions are provided below, in the other vignettes and the function help files.
fixDateTimeOriginal(only if necessary)
timeShiftImages(only if necessary)
detectionHistory(for occupancy analyses)
spatialDetectionHistory(for spatial capture-recapture analyses)
camtrapR was designed for camera trapping surveys in which an array of camera trap stations (each consisting of one or more camera traps per station) is operated in a study area. The vignettes will provide a guideline for how to use camtrapR in different sampling situations.
Since version 2.0.0, the functions
recordTableIndividual support video files. In addition
exifTagNames can read and display video metadata via ExifTool.
Video support allows you to process video files and identify species and individuals using the same workflow as for images. With minimal effort, you can extract and tabulate these information using the familiar functions within camtrapR.
Since this is a new feature, please be sure to read the vignette sections on video and the help files of the relevant functions and check the example code. Also, please test the workflow before working on larger amounts of data. Unfortunately, I could not include a sample video in the package due to file size constraints, but I hope you will get the idea. And please, let me know about your experiences working with videos in camtrapR and possible problems. I would really appreciate the feedback to inmprove and extend video support.
The main problem in working with videos is the lack of a standardized date/time tag in the metadata. Only if such a tag is present, camtrapR can successfully extract the video date/time. Not all cameras save date and time in a suitable format in the metadata, so before conducting a study using videos, please make sure that your cameras record a suitable (i.e., persistent) date/time tag in the metadata. You can check if there is a suitable tag available in the video metadata:
exifTagNamesto identify a usable video date/time tag
exifTagNames, make sure the date/time tag you choose is identical to the date/time shown in the data field of the video. In the example videos I tests, tags such as “QuickTime:CreateDate” worked well. The tags “File Creation Date/Time”, “File Modification Date/Time” and “File Access Date/Time” are not suitable, since they are updated when the video files are moved or copied.
This also means that if there is no suitable date/time tag in the video metadata, camtrapR will not be able to return information for these videos and will omit them. It really depends on your camera model. So if you consider using video for your surveys, please first check (with that specific camera model) if there is a suitable date/time tag in the video metadata. A suitable date/time tag is one that doesn’t change when the video file is moved, copied or otherwise modified. If a camera fails to record such a tag, camtrapR can’t return proper date and time, making the videos useless.
To facilitate understanding here is a glossary on how we use specific terms. It is standard camera trapping nomenclature.
camtrapR relies on the free and open-source software ExifTool written by Phil Harvey to extract metadata from images. ExifTool is freely available here and runs on Windows, Linux and MacOS. In order to use it, your system must be able to find the software. On MacOS, Linux and Unix it needs installation and should afterwards be found by the system without problems. How to set up Exiftool for Windows is detailed below. General installation instruction can be found here.
On Windows, ExifTool does not need installation. In order for Windows to be able to find ExifTool, follow the instructions found here. Be sure to download the stand-alone executable. The download file is a .zip which you need to unzip, rename the contained “exiftool(-k).exe” file to “exiftool.exe” and place it in, e.g., C:/Windows. Windows will be able to find ExifTool if exiftool.exe is placed in a directory that is contained in Windows PATH variable (e.g. C:/Windows).
# Check which directories are in PATH (output not shown here) Sys.getenv("PATH")
# Check if the system can find Exiftool (if output is empty "", system can't find Exiftool) Sys.which("exiftool")
## exiftool ## "C:\\WINDOWS\\exiftool.exe"
If exiftool.exe cannot be placed in a PATH directory (e.g. due to limited user privileges), users can place exiftool.exe in any directory and then add that directory to PATH temporarily for use in the running R session using the function
exiftoolPath. This is necessary if the directory containing exiftool.exe is not in PATH by default.
# this is a dummy example assuming the directory structure: C:/Path/To/Exiftool/exiftool.exe exiftool_dir <- "C:/Path/To/Exiftool" exiftoolPath(exiftoolDir = exiftool_dir)
Afterwards, Windows (via R) should be able to find ExifTool during the active session.
ExifTool is the performance bottleneck of the package functions. It can extract metadata at a rate of about 160 images per second (approx. 10,000 images per minute, measured on a laptop computer running Windows 7, Intel Core i5-2410M / 2.3 GHz, 6 GB RAM). Performance tends to be lower when ExifTool is first called and increases afterwards; and it decreases in situations with numerous camera trap stations with few images each (because ExifTool is called separately on every station directory and the associated overhead of loading ExifTool each time).
Before looking at how images are handled, let’s first familiarise ourselves with how information about camera trap stations are stored. Camera trap station information are tabulated in a simple data frame with 1 row per station (if there was 1 camera per station) or 1 row per camera (if there was more than 1 camera per station). Information to be stored in this table are: station (and camera) IDs, geographic coordinates, setup and retrieval dates and possible dates when camera were not operational (because of malfunction, animal interference, empty batteries, full memory cards etc.). The table can be generated standard spreadsheet software and loaded into R.
# here is a sample camera trap station table data("camtraps") camtraps
## Station utm_y utm_x Setup_date Retrieval_date Problem1_from Problem1_to ## 1 StationA 604000 526000 02/04/2009 14/05/2009 ## 2 StationB 606000 523000 03/04/2009 16/05/2009 ## 3 StationC 607050 525000 04/04/2009 17/05/2009 12/05/2009 17/05/2009
Note that the sample data contain only one camera per station. Thus, there is no need to differentiate between station and camera IDs. If there was more than one camera per station, an additional column for camera IDs would be needed. Consequently, there would be one row for each camera and thus several rows per station.
Station and camera IDs can be any combination of characters and numbers. Please don’t use underscores though, and more specifically, don’t use double underscores ("__"), as these are used in a number of functions to separate bits of information (e.g. in file names created by
imageRename or row names in
Column names are not prescribed to allow users freedom in naming their data the way they wish (with one exception detailed below). In the sample table, ‘Station’ contains station IDs, ‘utm_y’ and ‘utm_x’ contain the station’s geographic coordinates. ‘Setup_date’ and ‘Retrieval_date’ are the dates the stations were set up and retrieved from the field. All of these may have user-defined names. ‘Problem1_from’ and ‘Problem1_to’ are optional columns to specify periods in which cameras/stations were not operational. Additional pairs of columns such as ‘Problem2_from’ and ‘Problem2_to’ etc. can be added if cameras/stations malfunctioned repeatedly. Their names must follow the pattern given here.
All dates in this table (setup, retrieval and problem columns) should be of data type "character" and can be formatted in any way that function
as.Date can interpret. Since version 1.2, camtrapR also supports the more flexible and convenient naming conventions of package
lubridate, which makes it easier to specify dates correctly.
camtrapR by default assumes the standard format "YYYY-MM-DD", e.g. "2015-12-31", and we recommend to use that format (it is also best for sorting by date). In any case, the date format must be consistent between the various date columns.
Two functions (
surveyReport) utilize these date information and therefore contain arguments to specify the date format (
CTDateFormat, respectively). These arguments are used to interpret the character string in the table (e.g. "2015-12-31") as a date.
If these arguments contain the character “%” (characteristic of the format argument to
strptime), they are passed to function
as.Date as argument
format. If they don’t contain character “%”, they are interpreted as
orders arguments to the function
parse_date_time in the
Details on how to set it correctly can be found in the Details section of the help files of functions
Here are a few examples for December 1st 2015 ("generic" is the abstract representation of your date string (Y = year, M = month, D = day), "example" is a formatted example and "dateFormat argument" is what you’d specify in
CTDateFormat in either the base R or
lubridate naming convention):
|generic||example||dateFormat argument (base)||dateFormat argument (lubridate)|
In the sample table (
camtraps), we use another date format for demonstration purposes.
Data type of the ID and date columns in the table must be
factor. Please don’t use data type
Date. You can turn data type
If needed, station-/camera-level covariates can be specified in this table, e.g. trail or habitat type, camera model etc. They can later be used as covariates, e.g. in occupancy models.
After collecting images from camera traps, the images are saved into a directory structure like this:
If there was more than 1 camera per station, the station directories must contain camera subdirectories, e.g.
If you have more than 1 camera per station but don’t separate the images from different cameras at this stage, you will not be able to do so at a later point. Later in the workflow, you can decide whether you would like to keep them separate or merge them (in the function
Generally, you should not work on your raw data and instead keep them as a backup. If you rename you images with
imageRename, whole camtrapR workflow will take place in a copy of the images to prevent data loss.
Another important point is not to save any other data besides images in image directories. It may interfere with the operation of the package and ExifTool.
The directories for the raw images can be created automatically using the function
createStationFolders and the camera trap station table. As mentioned above, images can either be stored in station directories (if there was 1 camera per station) or in station/camera directories (if there was >1 camera per station). The behaviour is controlled by the function argument
cameras. It specifies the camera ID column in the camera trap information table. if it is defined, camera subdirectories will be created within the station directories.
Here is an example in which station directories without camera subdirectories are created.
# create a temporary dummy directory for tests # (normally, you'd set up an empty directory in a proper place, e.g. .../myStudy/rawImages) wd_createStationDir <- file.path(tempdir(), "createStationFoldersTest") # create station directories in wd_createStationDir StationFolderCreate1 <- createStationFolders (inDir = wd_createStationDir, stations = as.character(camtraps$Station), createinDir = TRUE)
## created 3 directories
## station ## 1 StationA ## 2 StationB ## 3 StationC ## directory ## 1 C:\\Users\\Juergen\\AppData\\Local\\Temp\\RtmpQHY0jW/createStationFoldersTest/StationA ## 2 C:\\Users\\Juergen\\AppData\\Local\\Temp\\RtmpQHY0jW/createStationFoldersTest/StationB ## 3 C:\\Users\\Juergen\\AppData\\Local\\Temp\\RtmpQHY0jW/createStationFoldersTest/StationC ## created exists ## 1 TRUE TRUE ## 2 TRUE TRUE ## 3 TRUE TRUE
IMPORTANT: Please note that in this vignette station directories are set up in a temporary directory. That does not make any sense in real life and is done here solely to demonstrate how the functions works. So please don’t do this at home! Instead, always work in permanent directories!
Once the directories are created, you can copy over your images from the memory cards.
There are situations in which the date and time of your images may be incorrect. Imagine you forgot to set the system time in one of your cameras or reset the time accidentally. Or think of a bug in the camera software that causes years to be wrong as happened in the cameras of a major manufacturer at the turn of the year 2015/2016. Another situation in which images times may need a little shift is when users wish to synchronise the record times between camera pairs.
In any case, systematic offsets of date and time recorded by cameras can be corrected easily. The function
timeShiftImages does just that by utilising the date/time shift module of ExifTool. All you need is a table containing the time offset in a certain format, i.e.
## Station camera timeshift sign ## 1 StationA NA 1:0:0 0:0:0 - ## 2 StationB NA 0:0:0 12:0:0 +
There is a
station column with station IDs,
camera is NA because there was 1 camera per station only in our example,
timeshift is the amount by which to shift the time of all images at that station, and
sign specifies the direction in which to shift time. Setting
+ sets image time ahead by the amount specified in
- sets image times back.
timeshift format is "year:month:day hour:minute:second", i.e. "1:0:0 0:0:0" is a shift of exactly 1 year and "0:0:0 12:10:01" 12 hours and 10 minutes and 1 second. In the above table, time stampes of images taken at StationA are shifted back by 1 year, and images taken at StationB are shifted ahead by 12 hours.
timeShiftImages should be run directly after saving the raw images on the hard disk.
# copy sample images to another location (so we don't mess around in the package directory) wd_images_raw <- system.file("pictures/raw_images", package = "camtrapR") file.copy(from = wd_images_raw, to = tempdir() , recursive = TRUE)
##  TRUE
wd_images_raw_copy <- file.path(tempdir(), "raw_images") timeshift_run <- timeShiftImages(inDir = wd_images_raw_copy, timeShiftTable = timeShiftTable, stationCol = "Station", hasCameraFolders = FALSE, timeShiftColumn = "timeshift", timeShiftSignColumn = "sign" )
## directory ## 1 C:\\Users\\Juergen\\AppData\\Local\\Temp\\RtmpQHY0jW/raw_images/StationA ## 2 C:\\Users\\Juergen\\AppData\\Local\\Temp\\RtmpQHY0jW/raw_images/StationB ## n_directories n_images ## 1 1 directories scanned 3 image files updated ## 2 1 directories scanned 3 image files updated
ExifTool has now updated the time tag of all images in the directories specified in the
timeShiftTable. The original images are preserved as XYZ.JPG_original files (XYZ being the original file name). By setting argument
undo = TRUE, the orginals are restored and the modified images are deleted. The function will check if the number of JPG_original files and JPG files in folders is identical. If not, the function will not work. It does not check for consistency of file names.
timeshift_undo <- timeShiftImages(inDir = wd_images_raw_copy, timeShiftTable = timeShiftTable, stationCol = "Station", hasCameraFolders = FALSE, timeShiftColumn = "timeshift", timeShiftSignColumn = "sign", undo = TRUE ) timeshift_undo
## directory ## 1 C:\\Users\\Juergen\\AppData\\Local\\Temp\\RtmpQHY0jW/raw_images/StationA ## 2 C:\\Users\\Juergen\\AppData\\Local\\Temp\\RtmpQHY0jW/raw_images/StationB ## n_images_undo ## 1 3 ## 2 3
Some Reconyx Hyperfire cameras (e.g. Hyperfire HC500) don’t store date and time in the standard Exif format. Consequently, camtrapR cannot read the DateTimeOriginal tag from these images. This can be fixed easily by using the camtrapR function
fixDateTimeOriginal or by following the instructions given by Mathias Tobler in the CameraBase documentation (page 7):
Raw images are copied from the raw image directories into a new location and renamed at the same time. The renamed file names follow this pattern (depending on whether there was one or more cameras per station):
Station ID and camera ID are derived from the raw image directory structure created earlier with
createStationFolders Date and time are taken from image Exif metadata (read using ExifTool). (X) is a numeric identifier that is assigned to all images taken at the same station (and camera, if applicable) within one minute. This is to avoid identical image names if images were taken in the same second (or in the same minute, if cameras record time in hours and minutes only).
Again, please be aware that temporary directories are used in the example. Set
outDir to a permanent directory. In addition, images are not actually copied (argument
copyImages = FALSE), but copying and renaming is mererly simulated in out example. So, in real world data, set
copyImages = TRUE.
# raw image location wd_images_raw <- system.file("pictures/raw_images", package = "camtrapR") # destination for renamed images to be copied to wd_images_raw_renamed <- file.path(tempdir(), "raw_images_renamed") renaming.table2 <- imageRename(inDir = wd_images_raw, outDir = wd_images_raw_renamed, hasCameraFolders = FALSE, copyImages = FALSE )
## StationA: 3 images |========== | 50%
## StationB: 3 images |====================| 100%
# here is the information for a few images head(renaming.table2)
## Directory ## 1 C:/Users/Juergen/AppData/Local/Temp/Rtmp2DNLng/Rinst48c0333b1550/camtrapR/pictures/raw_images/StationA ## 2 C:/Users/Juergen/AppData/Local/Temp/Rtmp2DNLng/Rinst48c0333b1550/camtrapR/pictures/raw_images/StationA ## 3 C:/Users/Juergen/AppData/Local/Temp/Rtmp2DNLng/Rinst48c0333b1550/camtrapR/pictures/raw_images/StationA ## 4 C:/Users/Juergen/AppData/Local/Temp/Rtmp2DNLng/Rinst48c0333b1550/camtrapR/pictures/raw_images/StationB ## 5 C:/Users/Juergen/AppData/Local/Temp/Rtmp2DNLng/Rinst48c0333b1550/camtrapR/pictures/raw_images/StationB ## 6 C:/Users/Juergen/AppData/Local/Temp/Rtmp2DNLng/Rinst48c0333b1550/camtrapR/pictures/raw_images/StationB ## FileName Station Camera DateTimeOriginal DateReadable ## 1 IMG0001.JPG StationA NA 2009-04-10 05:07:00 TRUE ## 2 IMG0002.JPG StationA NA 2009-04-21 00:40:00 TRUE ## 3 IMG0003.JPG StationA NA 2009-04-22 20:19:00 TRUE ## 4 IMG0001.JPG StationB NA 2009-04-05 00:11:00 TRUE ## 5 IMG0002.JPG StationB NA 2009-04-05 23:13:00 TRUE ## 6 IMG0003.JPG StationB NA 2009-04-07 00:23:00 TRUE ## outDir ## 1 C:\\Users\\Juergen\\AppData\\Local\\Temp\\RtmpQHY0jW/raw_images_renamed/StationA ## 2 C:\\Users\\Juergen\\AppData\\Local\\Temp\\RtmpQHY0jW/raw_images_renamed/StationA ## 3 C:\\Users\\Juergen\\AppData\\Local\\Temp\\RtmpQHY0jW/raw_images_renamed/StationA ## 4 C:\\Users\\Juergen\\AppData\\Local\\Temp\\RtmpQHY0jW/raw_images_renamed/StationB ## 5 C:\\Users\\Juergen\\AppData\\Local\\Temp\\RtmpQHY0jW/raw_images_renamed/StationB ## 6 C:\\Users\\Juergen\\AppData\\Local\\Temp\\RtmpQHY0jW/raw_images_renamed/StationB ## filename_new fileExistsAlready CopyStatus ## 1 StationA__2009-04-10__05-07-00(1).JPG FALSE FALSE ## 2 StationA__2009-04-21__00-40-00(1).JPG FALSE FALSE ## 3 StationA__2009-04-22__20-19-00(1).JPG FALSE FALSE ## 4 StationB__2009-04-05__00-11-00(1).JPG FALSE FALSE ## 5 StationB__2009-04-05__23-13-00(1).JPG FALSE FALSE ## 6 StationB__2009-04-07__00-23-00(1).JPG FALSE FALSE
So, the first image, "IMG0001.JPG" was renamed to "StationA__2009-04-10__05-07-00(1).JPG". Here is what the columns mean:
||the raw image directory|
||raw image file name|
||the station the image was taken at|
||the camera ID (here NA because there were no camera subdirectories )|
||Date and time in R-readable format|
||whether the date could be read from the metadata or not (TRUE = yes)|
||the directory the renamed image was copied to|
||the new file name|
||whether the images was copied successfully (TRUE = yes)|
At this point you created a copy of your raw images and renamed them with station ID, date and time.
addCopyrightTag can write a copyright tag into image Exif metadata. While this can be useful when sharing or publishing data, it is not required in the camtrapR workflow. The function will recursively find all images in
inDir and its subdirectories and writes a user-defined text into the Copyright field of the Exif metadata.
In doing so, Exiftool normally keeps the original images as .JPG_original files. Note that this behaviour will instantly double the number of images in inDir and the disk space required. If this is not desired, users can set the function argument
keepJPG_original = FALSE (default is
TRUE) in order to replace the original files without creating *.JPG_original files. I recommend to first try this on a copy of a subdataset and to then check the function output. If there are warnings like "Warning: [minor] Maker notes could not be parsed" image makernotes may be unreadable afterwards (they are proprietary, undocumented formats). On the other hand, you may never need these for analysing camera trapping data.
# copy sample images to temporary directory (so we don't mess around in the package directory) wd_images_ID <- system.file("pictures/sample_images_species_dir", package = "camtrapR") file.copy(from = wd_images_ID, to = tempdir(), recursive = TRUE)
##  TRUE
wd_images_ID_copy <- file.path(tempdir(), "sample_images_species_dir") # define an example copyright tag copyrightTagToAdd <- "Your Name (Your Organisation)" # write the tag to images addCopyrightTag(inDir = wd_images_ID_copy, copyrightTag = copyrightTagToAdd, askFirst = FALSE) # askFirst = FALSE prevents function from asking user to confirm action (which doesn't work in vignettes)
## 14 directories scanned 68 image files updated
When we check the outcome with function exifTagNames, we find field “Copyright” in line 27.
## Metadata of: ## C:\Users\Juergen\AppData\Local\Temp\RtmpQHY0jW/sample_images_species_dir/StationA/PBE/StationA__2009-04-21__00-40-00(1).JPG
## tag_group tag_name ## 1 ExifTool ExifToolVersion ## 2 ExifTool Warning ## 3 File FileName ## 4 File Directory ## 5 File FileSize ## 6 File FileModifyDate ## 7 File FileAccessDate ## 8 File FileCreateDate ## 9 File FilePermissions ## 10 File FileType ## 11 File FileTypeExtension ## 12 File MIMEType ## 13 File ExifByteOrder ## 14 File ImageWidth ## 15 File ImageHeight ## 16 File EncodingProcess ## 17 File BitsPerSample ## 18 File ColorComponents ## 19 File YCbCrSubSampling ## 20 EXIF Make ## 21 EXIF Model ## 22 EXIF XResolution ## 23 EXIF YResolution ## 24 EXIF ResolutionUnit ## 25 EXIF ModifyDate ## 26 EXIF YCbCrPositioning ## 27 EXIF Copyright ## 28 EXIF ExifVersion ## 29 EXIF DateTimeOriginal ## 30 EXIF CreateDate ## 31 EXIF ComponentsConfiguration ## 32 EXIF ShutterSpeedValue ## 33 EXIF UserComment ## 34 EXIF FlashpixVersion ## 35 EXIF ColorSpace ## 36 EXIF ExifImageWidth ## 37 EXIF ExifImageHeight ## 38 EXIF Compression ## 39 EXIF ThumbnailOffset ## 40 EXIF ThumbnailLength ## 41 EXIF ThumbnailImage ## 42 Composite ImageSize ## 43 Composite Megapixels ## 44 Composite ShutterSpeed ## value ## 1 11.80 ## 2 Invalid EXIF text encoding for UserComment ## 3 StationA__2009-04-21__00-40-00(1).JPG ## 4 C:/Users/Juergen/AppData/Local/Temp/RtmpQHY0jW/sample_images_species_dir/StationA/PBE ## 5 27 kB ## 6 2020:04:22 20:22:27+02:00 ## 7 2020:04:22 20:22:27+02:00 ## 8 2020:04:22 20:22:25+02:00 ## 9 rw-rw-rw- ## 10 JPEG ## 11 jpg ## 12 image/jpeg ## 13 Little-endian (Intel, II) ## 14 100 ## 15 75 ## 16 Baseline DCT, Huffman coding ## 17 8 ## 18 3 ## 19 YCbCr4:2:2 (2 1) ## 20 G4 ## 21 CUDDEBACK ## 22 72 ## 23 72 ## 24 inches ## 25 2009:04:21 00:40:00 ## 26 Co-sited ## 27 Your Name (Your Organisation) ## 28 0200 ## 29 2009:04:21 00:40:00 ## 30 2009:04:21 00:40:00 ## 31 Y, Cb, Cr, - ## 32 1 ## 33 1 ATTEMPT G1H ## 34 0100 ## 35 sRGB ## 36 100 ## 37 75 ## 38 JPEG (old-style) ## 39 450 ## 40 25353 ## 41 (Binary data 25353 bytes, use -b option to extract) ## 42 100x75 ## 43 0.007 ## 44 1
The copyright tag will henceforth be visible in digiKam and other image management software.
Now that the raw images are organised, the next step is species identification covered in the next vignette.