stormwindmodel package was created to allow users to model wind speeds at grid points in the United States based on “best tracks” hurricane tracking data, using a model for wind speed developed by Willoughby and coauthors (2006). The package includes functions for interpolating hurricane tracks and for modeling and mapping wind speeds during the storm. It includes population mean center locations for all U.S. counties, which can be used to map winds by county; however, other grid point locations can also be input for modeling. Full details on how this model is fit are provided in the “Details” vignette of the
For examples, the package includes data on the tracks of Hurricane Floyd in 1999 and Hurricane Katrina in 2005. You can load these example best tracks data sets using:
## # A tibble: 6 x 4 ## date latitude longitude wind ## <chr> <dbl> <dbl> <dbl> ## 1 199909071800 14.6 -45.6 25 ## 2 199909080000 15 -46.9 30 ## 3 199909080600 15.3 -48.2 35 ## 4 199909081200 15.8 -49.6 40 ## 5 199909081800 16.3 -51.1 45 ## 6 199909090000 16.7 -52.6 45
## # A tibble: 6 x 4 ## date latitude longitude wind ## <chr> <dbl> <dbl> <dbl> ## 1 200508231800 23.1 -75.1 30 ## 2 200508240000 23.4 -75.7 30 ## 3 200508240600 23.8 -76.2 30 ## 4 200508241200 24.5 -76.5 35 ## 5 200508241800 25.4 -76.9 40 ## 6 200508250000 26 -77.7 45
This example data includes the following columns:
date: Date and time of the observation (in UTC)
longitude: Location of the storm at that time
wind: Maximum wind speed at that time (knots)
You can input other storm tracks into the wind modeling functions in the
stormwindmodel package, but you must have your storm tracks in the same format as these example dataframes and with these columns names. If necessary, use
dplyr to rename columns and
weathermetrics to convert windspeed into knots.
stormwindmodel package also includes a dataset with the location of the population mean center of each county in the eastern United States (
county_points). This dataset can be used as the grid point inputs if you want to model storm-related winds for counties. These counties are listed by Federal Information Processing Standard (FIPS) number, which uniquely identifies each U.S. county. This dataset comes from the US Census file of county population mean center locations, as of the 2010 Census.
## gridid glat glon ## 1 01001 32.50039 -86.49416 ## 2 01003 30.54892 -87.76238 ## 3 01005 31.84404 -85.31004 ## 4 01007 33.03092 -87.12766 ## 5 01009 33.95524 -86.59149 ## 6 01011 32.11633 -85.70119
You can use a different dataset of grid points to model winds at other U.S. locations, including at evenly-spaced grid points. However, you will need to include these grid points in a dataframe with a similar format to the example
county_points dataframe, with columns for each grid point id (
gridid— these IDs can be random but should be unique across grid points), and
glon for latitude and longitude of each grid point.
The main function of this package is
get_grid_winds. It inputs storm tracks for a tropical cyclone (
hurr_track) and a dataframe with grid point locations (
grid_df). It models winds during the tropical storm at each grid point and outputs summaries of wind during the storm at each grid point from the storm. The wind measurements generated for each grid point are:
vmax_gust: Maximum 10-m 1-minute gust wind experienced at the grid point during the storm
vmax_sust: Maximum 10-m 1-minute sustained wind experienced at the grid point during the storm
gust_dur: Duration gust wind was at or above a specified speed (default is 20 m/s), in minutes
sust_dur: Duration sustained wind was at or above a specified speed (default is 20 m/s), in minutes
This function can take a few minutes to run, especially if you are modeling winds at many locations.
To get modeled winds for Hurricane Floyd at U.S. county centers, you can run:
## gridid vmax_gust vmax_sust gust_dur sust_dur ## 1 01001 2.969661 1.993061 0 0 ## 2 01003 1.929468 1.294945 0 0 ## 3 01005 4.800611 3.221887 0 0 ## 4 01007 2.312488 1.552005 0 0 ## 5 01009 2.609132 1.751095 0 0 ## 6 01011 4.076456 2.735877 0 0
If you use the
county_points data for the
grid_df argument, you will model winds for eastern U.S. county centers. In this case, the
gridid is the county FIPS. If you model winds at U.S. county centers, you can map the results using the
map_wind function. By default, this function maps the maximum sustained wind in each county during the storm in meters per second:
You can input the track for any Atlantic Basin tropical storm into
get_grid_winds, as long as you convert it to meet the following format requirements:
tbl_df(you can use the
dplyrto do this)
date: A character vector with date and time (in UTC), expressed as YYYYMMDDHHMM.
latitude: A numeric vector with latitude in decimal degrees.
longitude: A numeric vector with longitude in decimal degrees.
wind: A numeric vector with maximum storm wind speed in knots
For the grid point locations at which to model, you can input a dataframe with grid points anywhere in the eastern half of the United States. For example, you may want to map wind speeds for Hurricane Katrina by census tract in Orleans Parish, LA. The following code shows how a user could do that with the
tigris package can be used to pull US Census tract shapefiles for a county. You can use the following code to pull these census tract file shapefiles for Orleans Parish in Louisiana:
This shapefile gives the polygon for each census tract. You can use the
gCentroid function from the
rgeos package to determine the location of the center of each census tract:
## x y ## 51 -90.11803 30.01587 ## 82 -89.99302 29.89855 ## 142 -89.95540 30.02543 ## 147 -89.95393 30.04011 ## 148 -89.91693 30.03769 ## 372 -90.01988 29.95959
With some cleaning, you can get this data to the format required for the
get_grid_winds function. In particular, you should add the tract id from the original shapefiles as the grid id, as this will help you map the modeled wind results:
## # A tibble: 6 x 3 ## glon glat gridid ## <dbl> <dbl> <chr> ## 1 -90.1 30.0 007606 ## 2 -90.0 29.9 000617 ## 3 -90.0 30.0 001748 ## 4 -90.0 30.0 001747 ## 5 -89.9 30.0 001750 ## 6 -90.0 30.0 000800
Here is a map of the census tracts, with the center point of each shown with a red dot (note that an area over water is also included– this is included as one of the census tract shapefiles pulled by
tigris for Orleans Parish):
new_orleans_tract_centers is now in the appropriate format to use with the
stormwindmodel functions, you can input it directly into
get_grid_winds to model the winds from Hurricane Katrina at each census tract center:
## glon glat gridid vmax_gust vmax_sust gust_dur sust_dur ## 1 -90.11803 30.01587 007606 56.35062 37.81921 1095 675 ## 2 -89.99302 29.89855 000617 64.37255 43.20306 1125 705 ## 3 -89.95540 30.02543 001748 65.10562 43.69505 1110 705 ## 4 -89.91693 30.03769 001750 65.12737 43.70964 1110 705 ## 5 -89.95393 30.04011 001747 64.34990 43.18785 1110 705 ## 6 -90.12008 29.91933 011400 56.90100 38.18859 1110 690
To plot these modeled winds, you can merge this modeled data back into the “sf” version of the census tract shapefile data, joining by census tract identification, and then add to the map. You can show wind speed in this map with color.
There are also functions in this package that you can use to create a time series of all modeled winds at a specific grid point throughout the storm. For example, here is the code to calculate modeled wind at the population mean center of Dare County, NC (FIPS: 37055) throughout Hurricane Floyd:
dare_county <- county_points %>% # Get grid point information for Dare County filter(gridid == "37055") with_wind_radii <- floyd_tracks %>% create_full_track() %>% # Interpolate tracks to every 15 minutes add_wind_radii() # Calculate required inputs for Willoughby wind model dare_winds <- calc_grid_wind(grid_point = dare_county, # Model winds at one grid point with_wind_radii = with_wind_radii) ggplot(dare_winds, aes(x = date, y = windspeed)) + geom_line() + xlab("Observation time (UTC)") + ylab("Modeled surface wind (m / s)")
For more details, see the “Details” vignette, which walks through all steps of the modeling process.
There are a number of options when mapping wind speeds using
First, you can use the
add_storm_track function to add the storm track to the map. This function inputs one dataframe with tracking data (the
floyd_tracks example data that comes with the package in this case) as well as the plot object created using
map_wind, which is input using the
plot_object argument. In this example code, we’ve first created the base map of modeled winds in each county using
map_wind. We then input that, along with Floyd’s track data, into
add_storm_track to create a map with both winds and the storm tracks:
You can choose whether to map sustained or gust winds (
value, which can take “vmax_gust” or “vmax_sust”), as well as the unit to use for wind speed (
wind_metric, which can take values of “mps” for meters per second [the default] or “knots”). For example, you can modeled gust wind speeds in knots during Hurricane Floyd using:
Finally, you can map a binary classification of counties with winds at or above a certain break point. For example, to map counties with sustained wind at or above 34 knots during Hurricane Floyd, you can run:
You can get an R version of the hurricane best tracks data for Atlantic basin storms from 1988 to 2015 through the
hurricaneexposuredata package (in development on GitHub). For more information, see the GitHub repository for that package.
Willoughby, HE, RWR Darling, and ME Rahn. 2006. “Parametric Representation of the Primary Hurricane Vortex. Part II: A New Family of Sectionally Continuous Profiles.” Monthly Weather Review 134 (4): 1102–20.